Insulation Stick Pins
Insulation stick pins and washers are used to fasten heavier insulation materials to surfaces that s
Insulation stick pins and washers are used to fasten heavier insulation materials to surfaces that self adhesive insulation hangers can’t work to. Each insulation stick pin has 44 holes on the perforated base. The 44 holes are used to grab the adhesive or allow a screw/nail to hold the base in place. Once the insulation material is pierced onto the pin, a self locking washer can be installed to hold the insulation in place.
Insulation stick pins
Stainless steel or Galvanized steel
Stainless steel, Aluminum, galvanized steel
41mm, 50mm 63mm, 89mm, 114mm, 203mm.
Building insulation,Duct Insulation
41mm insulation stick pins
50mm insulation stick pins
63mm insulation stick pins
89mm insulation stick pins
114mm insulation stick pins
203mm insulation stick pins
● 1-5/8": Used for 1-1/2" .75# Fiberglass Duct Wrap
● 2-1/2": Used for 2" Fiberglass Rigid Board / Foam Board
● 4-1/2": Used for 4" Fiberglass Rigid Board / R-13
● 6-1/2": Used for R-19 Fiberglass Batt Insulation
● 9-1/2": Used for R-30 Fiberglass Batt Insulation
● 12-1/2": Used for R-38 Fiberglass Batt Insulation
1: Q: Will you pack 500 self locking washers with the stick pins together
A: Yes, there are 500 insulation stick pins and 500 self locking washers in a box.
2: Q: What insulation material can be installed by insulation stick pins?
A: fiberglass board, Rock wool panel. Duct warp etc.
3: Q: what should we do before install the insulation by insulation stick pins?
A: You need to clean the surface, the surface must be clean, dry, non-painted surface.